jkb

Hi Igor, This does not happen! If I link a clip to slide 1, then move slide 1 to a different position - Slide 10, then only the clip linked to slide 1 moves, all other clips stay where they were on the timeline. There are many reasons we need to link more than 1 sound clip - for example we have speech which is broken up into small sections & we need to adjust the position of a slide. Then all of the small speech clips need to be moved by the same amount to follow the slide. Or if we have carefully worked out timings of sound to images but find we need to insert or remove one or more slides - all of the carefully timed clips need to move to keep their relationship with the slides. It would be very useful if we could link several sound clips (on same and different tracks) with each other & be able to move them as a block. Jill

Thanks Igor, the File came back clean from AVG as I thought it would. Jill

Hi Roel, click on Igor's. Picture in the above post. Then click on the envelope symbol in the window that appears. This will open up a private message where you can type your reply. Jill

It does everything he needs it to. Jill

working OK in North Wales UK Jill

I have a friend who is using PTE7.5.10 (the latest version) and whenever he sends an exe to anyone who uses Avast antivirus it says it may be unsafe. If the file is sent to Avast for checking it comes back as clean. If I scan the file with AVG (right click & scan) it says it is clean. But when I try to run the file, AVG does a quick 15 second scan first & says it may contain a virus. AVG is now part of Avast. I am sure this will come back from AVG as clean. He had similar problems with PTE 7.0 before downloading the latest 7.5 I can send you the file Igor if you need it. Jill

We use wetransfer for all competitions & have never had any problems with it. You can send up to 2gb with the free version. Both the sender & receipient get an email when the file has been uploaded. Once the recipient downloads the file the sender recives an email to tell them this. The files only stay available for 7 days, but you can easily resend if required. It is fast, safe & effective way to send any file type. Jill

could the second copy be opened in Read Only mode? This happens if I try to open the same xls file twice. You then cannot overwrite the original as the Read Only will simply close & not save. Jill

I don't care what the numbers are, or how many there are of them, I need my keyframes to relate to the music/soundtrack. I need to be able to roughly position a keyframe then finely adjust it by using the arrow keys. Can't now remember if we can do this as it is a long time since I made anything that used keyframes. Too busy just making Menus these days!! Jill

+1

Thanks Dave, that worked Jill

I am creating a Menu to run various shows. Each group of AV's is within a Frame But only the items in the top Frame (in the O&A Object List) are clickable It seems that the top Frame hides all the lower Frames. Is this a bug or is it meant to work this way? I think the actual Frame should be transparent and still allow objects located in a lower Frame to be clickable. I know I can resize all the Frames so that they don't overlap, but this means having to resize & align everything again. Jill

Hi George, It really is down to the Graphics card. 1920 x 1080 is standard for video files. If the laptop has dual graphics ie an inbuilt chip on the motherboard - usually intel, and also a seperate dedicated graphics card - usually Nvidia. Then you can force the laptop to use the dedicated graphics. It should play better but may still judder occasionally depending on the dedicated VRam. If there is only the inbuilt chip then it is unlikely to play video in an exe smoothly, or even some complex animation. A solution is to publish an MP4 file and to use VLC player to play this. I have found that VLC will play just about everything. We now make an MP4 for anything with video when we don't know the spec of the computer it will be played on , for sending to competitions etc. Jill

Maybe Igor still needs to look at it to find out why it does this? Jill

Hi George, it could be that your PNG files are too large. John had a similar problem with large PNG files. Try saving at a smaller size and see if that works. Jill

It is useful to tempoarily mute one track so you can listen to the others to adjust timing , level etc. So it is a very useful feature. However it would be nice to be able to just mute a single clip rather than the whole track. What is also needed is the ability to be able to solo one track quickly. It takes time to have to go through & mute/unmute tracks individually. A 'solo' feature would automatically mute the other tracks and then unmute when the Solo is turned off again. I now do all my audio mixing in PTE & very rarely have to use an external editor. Jill

You can quickly mute a track in the timeline. Right click on the track and select mute. If you have more than one track do it for all. Jill

You can still move the sound clip even when it is linked to a slide, just drag it along the timeline as normal. To link several clips to one slide they must be on different tracks. Jill

Click on the slide you want to link to. Then right click the audio clip and select link to slide X. Jill

Just above the file tree there should be a drive letter (normally C) with a little arrow next to it. Click on the little arrow and you should see all the other drives available. Select the one you want. Jill

If you use run slideshow then all shows must be made with exactly the same version of PTE as the menu. Eg 9.0.16 If you have shows made with different versions then use run application. You need to set your menu slides to wait for key press and use the right arrow key to move between them. Jill

Hi Willemx, Create a slide, add a text object with the name of each of your shows. You can also use a small image as the link to each show instead of Text In The Properties tab select 'action on mouse click' & set this to 'run application' & navigate to the correct show. If you remove the path name & just leave the show name - eg "Show1.exe" then you can run them from any drive or computer. NB you need to keep the " Just make sure that the Menu.exe & each Show.exe are all in the same folder Set the Projectect options for this one slide 'Menu' to be 'Wait for key press' & create the exe. To have all the shows run after each other you would need to have a seperate version of each show with a link in the Project OPtions Advance Tab to Run application on exit. Jill

I confirm that the 'Wait for Key Press' problem has been solved. Thanks Jill

Ken, this is a bug that I have already raised. Jill

I have now created the .exe & I am getting the same Exception error when running the .exe file This is for a Public Competition next week so I have to have the show running perfectly. Jill Igor I will PM you the BIZ for the Project