Jean-Cyprien Posted July 24, 2009 Report Share Posted July 24, 2009 Sorry, Igor, it still doesn't work for meEven with a "right" icon Link to comment Share on other sites More sharing options...
JPD Posted July 24, 2009 Report Share Posted July 24, 2009 Thanks! I just reproduced this error message with an icon and found the reason of this problem - it was a simple mistake in the code of the program. Beta 5 completely fixes this issue:http://www.wnsoft.com/apr/picturestoexe-beta.zip (7 MB)Sorry Igor but I have always the problem with beta #5 : Access violation at adress 770E8A4 oleaut32.dll read of adress FFFFFFFD Link to comment Share on other sites More sharing options...
Gérard de Lux Posted July 24, 2009 Report Share Posted July 24, 2009 Same problem, same error message. Link to comment Share on other sites More sharing options...
nobeefstu Posted July 24, 2009 Report Share Posted July 24, 2009 Igor,Iam also getting the same error message as others with beta 5.75 with use of any custom icon. Plus the PTE GUI freezes after the error message.However ... it still produced a non-working exe. See attachment below. Link to comment Share on other sites More sharing options...
Igor Posted July 24, 2009 Report Share Posted July 24, 2009 Excuse me! There were two mistakes in the code - I fixed one and missed another. Please wait for Beta 6. Link to comment Share on other sites More sharing options...
Mike Reed Posted July 25, 2009 Report Share Posted July 25, 2009 Hi IgorPTE just gets better and better. One thought. When using two monitors and running a preview it would be most helpful if the Blue curser in the time line moves in sync as the preview is seen on the other monitor. I appreciate you can do this in the editing mode but when viewing at full screen things to adjust often stand out more that in the smaller viewing screen. Link to comment Share on other sites More sharing options...
xahu34 Posted July 30, 2009 Report Share Posted July 30, 2009 The effect of a jumping key frame, as described by Cedric Dawnhawk, see here, is still to be seen in 5.7B6.Regards,Xaver Link to comment Share on other sites More sharing options...
wideangle Posted July 30, 2009 Report Share Posted July 30, 2009 PicturesToExe Deluxe 5.7 Beta 4 is available.Download link:http://www.wnsoft.com/apr/picturestoexe-beta.zip (7 MB)This beta still doesn't solve several visual issues with objects in some complex scenes. We're working on the solution, and I hope it will be fixed in Beta 5.Changes in Beta 4:+ You can assign any icon for your created executable file of a slideshow (including large icons with alpha semi-transparancy.+ Updated language files.* Fixed visual bug in Create menu called from Objects and animation editor.* Fixed bug of previous Beta 3 when the program always produced damaged not workable screensaver.* Some other changes.Igor,You hoped that the visual issues with objects in some complex scenes would be fixed by Beta 5.Am I correct in saying that Beta 6 still hasn't resolved those issues?Regards, wideangle. Link to comment Share on other sites More sharing options...
Igor Posted July 30, 2009 Report Share Posted July 30, 2009 The effect of a jumping key frame, as described by Cedric Dawnhawk, see here, is still to be seen in 5.7B6You hoped that the visual issues with objects in some complex scenes would be fixed by Beta 5.Am I correct in saying that Beta 6 still hasn't resolved those issues?We need more time, sorry. I'm sure it will be fixed on the next week in Beta 7. Link to comment Share on other sites More sharing options...
nobeefstu Posted July 31, 2009 Report Share Posted July 31, 2009 Igor,The fix for custom icons works great for both Single and Multi format. Im downloading the 5.7 help file now to see new adds.ahhhaaaaaa ... PicturesToExe on Wikipedia Link to comment Share on other sites More sharing options...
JPD Posted July 31, 2009 Report Share Posted July 31, 2009 * Fixed bug of Beta 4-5 with assigning of a custom icon file for executable file with a slideshow.Seems OK now. Thanks* Vastly reduced memory usage for Undo/Redo system. Earlier long work with very large slides could cause "Out of memory" error message.Many thanks for this important modification. It became to be a problem with complex slideshow and it seems good now : a very good feature.Do you think include in V5.7 the two requets I send you lat week ?.Thanks to you and your team for all the very difficult job you are doing. Link to comment Share on other sites More sharing options...
Jean-Cyprien Posted July 31, 2009 Report Share Posted July 31, 2009 Thank you for all you've done, and that you're doing ! Link to comment Share on other sites More sharing options...
Picsel Posted August 1, 2009 Report Share Posted August 1, 2009 It seems there is a remaining problem in v5.7 beta 6 when moving a picture file. This problem exists with Windows 7 not with Windows XP.I transfer an old slideshow made with v5.6 and windows XP on a new PC working under Windows 7. I moved also all my files but with different file names.When I open an old pte file (only one picture), a window pops up, as usual, indicating that PTE does not find the picture. OK. I open the O&A editor and in the Properties tab I change the adress of the picture. Everything seems OK, the picture appears normally in the O&A window and all the effects run perfectly well, but when I close the O&A editor, a blue screen appears above the picture inside the viewer with "Image not found:" "Path:" in despite the right picture was found and displayed. If I create an exe file of the slideshow, this blue screen remains above the picture. I made the same exercise with v5.6 +Windows 7, I got the same result. I came back with my PC working with XP. I changed the file name and made the same exercise and everything is OK.Daniel Link to comment Share on other sites More sharing options...
Igor Posted August 3, 2009 Report Share Posted August 3, 2009 Daniel,Currently I can't reproduce this issue with updating of an image file path.1) How exactly you do this: type a new path manually in text box or click small button near to the text box to call Open dialog and choose this picture from a list? I've tried both ways with same successful result.2) Please try to save project file under another name after you updated image file path. Re-open it. Will PicturesToExe find the updated image? If no, please send me only .pte project file. And let me know right updated file path which should be used in this project for this image file.3) Please try to create a new one slide test project under Windows 7, then move used image file to another folder. Will this problem occur again? Link to comment Share on other sites More sharing options...
JPD Posted August 3, 2009 Report Share Posted August 3, 2009 I can't explain here what I requested by mail, but is it possible to know if the requests I did july 24th will be included or not in V5.7, for me it's very important. Thanks for answer.If you haven't received them, tell me, I'll send them to you. Link to comment Share on other sites More sharing options...
Igor Posted August 3, 2009 Report Share Posted August 3, 2009 Jean-Pierre,Sorry for the delay! I'll reply on your email tomorrow. Link to comment Share on other sites More sharing options...
Picsel Posted August 4, 2009 Report Share Posted August 4, 2009 Thanks Igor for your attention.1) How exactly you do this: type a new path manually in text box or click small button near to the text box to call Open dialog and choose this picture from a list? I've tried both ways with same successful result.- by typing a new path manually in text box2) Please try to save project file under another name after you updated image file path. Re-open it. Will PicturesToExe find the updated image? If no, please send me only .pte project file. And let me know right updated file path which should be used in this project for this image file.- with this pte project (baie_de_concarneau2.pte), I tried to change the picture by clicking the small button near the text box and choosing the picture inside the picture in the O&A editor, I tried to change the picture by clicking the button "change the picture" over the viewer in the main window but without success the blue screen error remains. (But I tried after to modify the pte file with my PC / XP but the result was the same). The right path is : E:\Users\user\Videos\panorama_bretagne\panorama_concarneau.jpgYou will find the .pte file in the attachment you will find also a jpeg picture which is a print screen showing the blue screen error, if needed I can also provide you with the full saved zip file at your email adress. 3) Please try to create a new one slide test project under Windows 7, then move used image file to another folder. Will this problem occur again?As you suggested to do I have made several slideshow tests using exactly the same method and everything was OK. with W7 or XP.The only difference I can notice : baie_de_concarneau2.pte was my first slideshow after the installation of PTE on my new PC/W7. Is this information relevant or not for you?I hope that could be helpful to you.baie_de_concarneau2.txt Link to comment Share on other sites More sharing options...
nobeefstu Posted August 5, 2009 Report Share Posted August 5, 2009 Picsel,My review of your file shows you are missing another image object in Slide 1.The Blue Missing display is not your main image object. Picture=H:\baie_de_concarneau2_Aug3-2009_19-42-33_Windows7\panorama_concarneau.jpgThe missing image object is yourImageName=H:\baie_de_concarneau2_Aug3-2009_19-42-33_Windows7\Texte.pngHave you added this file to your Windows 7 files in any tests to find results ? Link to comment Share on other sites More sharing options...
Picsel Posted August 5, 2009 Report Share Posted August 5, 2009 .....Have you added this file to your Windows 7 files in any tests to find results ?Hello nobeefstu, this object is at the right place in the slideshow file, with or without this object the problem remains the same. (Find in the attachments the baie_de_concarneau3.pte file (without the text object) and the jpeg print screen)The problem appears the first time I was working with W7 but I am not sure at all that W7 is responsible for that.You can see (refer to my previous posts) that several other exercices were made (as required by Igor) using exactly the same method but with a positive result whatever the OS, XP or W7.Daniel.baie_de_concarneau3.txt Link to comment Share on other sites More sharing options...
Lin Evans Posted August 5, 2009 Report Share Posted August 5, 2009 Hi Igor,Thank you for the "fix" - it works great now with parent/child/grandchild just as before without upsetting anything else!!Best regards,Lin Link to comment Share on other sites More sharing options...
JPD Posted August 5, 2009 Report Share Posted August 5, 2009 I have made 3 exe from the 3 most difficult slideshows for PTE I did, one, "Mon maîtr"e use intensive transformations of parent-child objects (used also a long time ago in Fantaisies florales), the second one, "Penser avec son pinceau" which use thousand masks; the third one "Diapositiviades auvergnates" in which there is like a video 720 x 450 during 7'27", the slideshow is a full HD definition and for which the speed of calculation is very important, all these exe works like they do with 5.6. All the functions of 5.6 in exe files works correctly now in 5.7.Bravo Igor and team. Link to comment Share on other sites More sharing options...
Jean-Cyprien Posted August 5, 2009 Report Share Posted August 5, 2009 Very good job, Igor !My dodecaedron looks now as a decaedron ! and my nephews and nieces danse correctly. My sorcerer's apprentice is very happy !!Thanks a lot. Link to comment Share on other sites More sharing options...
thedom Posted August 5, 2009 Author Report Share Posted August 5, 2009 Normal display in 5.6.3 :Problem in 5.7 beta 3 :Igor, this problem of display still remains with beta 7. And when I run the preview mode, I have an error message (see file attached). The problem with shadows is fixed ! Link to comment Share on other sites More sharing options...
Igor Posted August 5, 2009 Report Share Posted August 5, 2009 Dominique,Please send me source files of your project. Or just this one slide.I'm sure it can be easily solved in next version! Link to comment Share on other sites More sharing options...
susiesdad Posted August 6, 2009 Report Share Posted August 6, 2009 Igor, this problem of display still remains with beta 7. And when I run the preview mode, I have an error message (see file attached).I get the same error message when I run in Preview but it is not present in an exe made from the same project.Alan Link to comment Share on other sites More sharing options...
Recommended Posts