JEB Posted August 6, 2010 Report Share Posted August 6, 2010 Hi,This is an area that I have never been too confident with so I thought that now was the time that I should make the effort to understand it more clearly. I have put together a document that was intended to be two pages but has developed into twenty. I hope it may be of help to others and I certainly hope that there are not too many errors. I would very much appreciate anybody who spots an error to bring it to my attention and I will endeavour to put it right.One particular area of doubt is crossover. I have carried out some basic research with Audacity which suggests to me that I am correct in what I say, but I still have a little niggle of doubt!I am indebted to Peter Appleton who manfully agreed to proof read for me. He did much more than that, pointing out at least a couple of howlers that I have been able to address. I should also give credit to Lin's video tutorial which I would strongly recommend all to watch.This is the linkhttp://www.mediafire.com/file/uvnx8e46dx7lsu9/Audio in PTE 060810.pdfRegardsJohn Barnett Quote Link to comment Share on other sites More sharing options...
Ken Cox Posted August 6, 2010 Report Share Posted August 6, 2010 JEB thks to you and your helpers ken Quote Link to comment Share on other sites More sharing options...
fh1805 Posted August 6, 2010 Report Share Posted August 6, 2010 One particular area of doubt is crossover. I have carried out some basic research with Audacity which suggests to me that I am correct in what I say, but I still have a little niggle of doubt!John,You and me both !!!regards,Peter Quote Link to comment Share on other sites More sharing options...
Guest Yachtsman1 Posted August 6, 2010 Report Share Posted August 6, 2010 JebProviding it's a normal PDF file you can upload it direct to your post like a picture, no need for Mediafire.Regards Yachtsman1. Quote Link to comment Share on other sites More sharing options...
RayC Posted August 7, 2010 Report Share Posted August 7, 2010 Thanks for that John it will be most helpfull. All ready printed. All the best RayC Quote Link to comment Share on other sites More sharing options...
JEB Posted August 7, 2010 Author Report Share Posted August 7, 2010 JebProviding it's a normal PDF file you can upload it direct to your post like a picture, no need for Mediafire.Regards Yachtsman1.I understand there is a limit of 2 MB on the Forum, this is 3.5 MB.John Quote Link to comment Share on other sites More sharing options...
JEB Posted August 7, 2010 Author Report Share Posted August 7, 2010 Thanks for that John it will be most helpfull. All ready printed. All the best RayCRay,Don't rely too heavily on this as I'm no expert. This simply started out as an exercise to try to understand the topic a bit more clearly and it sort of grew!I am hoping that some of our more talented members will confirm one way or another its accuracy.John Quote Link to comment Share on other sites More sharing options...
Guest Yachtsman1 Posted August 7, 2010 Report Share Posted August 7, 2010 Hi JohnThe one I put on here was 1MB, you learn something every day. Regards EricYachtsman1 Quote Link to comment Share on other sites More sharing options...
dpletts Posted August 7, 2010 Report Share Posted August 7, 2010 Hi John,An excellent explanation of audio in version 6.5. Thank you for the hard work.May I just mention that if you place a second or subsequent sound on a track that already has a sound placed on it, the 'offset' time refers to the gap between the end of one sound and the start of the next sound rather than the offset from the start of the project, which only applies to the first sound on a track.Putting extra, offset, sounds on a different track, as shown in the tutorial, makes it much easier to handle the offset. As you can't use the crossfade effect in this situation, you may have to engineer your own crossfades simply by setting fadein and fadeout times for each sound.Of course, if you are simply adding another sound immediately after an existing one on the same track, crossfade becomes very useful.Its a bit late in the evening for me, so I hope this is understandable. Cheers,David P Quote Link to comment Share on other sites More sharing options...
JEB Posted August 7, 2010 Author Report Share Posted August 7, 2010 Hi John,An excellent explanation of audio in version 6.5. Thank you for the hard work.May I just mention that if you place a second or subsequent sound on a track that already has a sound placed on it, the 'offset' time refers to the gap between the end of one sound and the start of the next sound rather than the offset from the start of the project, which only applies to the first sound on a track.Putting extra, offset, sounds on a different track, as shown in the tutorial, makes it much easier to handle the offset. As you can't use the crossfade effect in this situation, you may have to engineer your own crossfades simply by setting fadein and fadeout times for each sound.Of course, if you are simply adding another sound immediately after an existing one on the same track, crossfade becomes very useful.Its a bit late in the evening for me, so I hope this is understandable. Cheers,David PDavid,It's even later in the evening for me, so I'll leave that one till tomorrow but it looks like I have an additional bit of data to add once I've thought it through!Thanks for taking the time to reply.John Quote Link to comment Share on other sites More sharing options...
photoflora Posted August 23, 2010 Report Share Posted August 23, 2010 Just what I was seaching for! Pages 8 & 9 'Crossfading' and 10 'Audio Clip Properties' will be invaluable. I have to teach this, so first I need to understand it...Many Thanks!PhotoFloraHi,This is an area that I have never been too confident with so I thought that now was the time that I should make the effort to understand it more clearly. I have put together a document that was intended to be two pages but has developed into twenty. I hope it may be of help to others and I certainly hope that there are not too many errors. I would very much appreciate anybody who spots an error to bring it to my attention and I will endeavour to put it right.One particular area of doubt is crossover. I have carried out some basic research with Audacity which suggests to me that I am correct in what I say, but I still have a little niggle of doubt!I am indebted to Peter Appleton who manfully agreed to proof read for me. He did much more than that, pointing out at least a couple of howlers that I have been able to address. I should also give credit to Lin's video tutorial which I would strongly recommend all to watch.This is the linkhttp://www.mediafire.com/file/uvnx8e46dx7lsu9/Audio in PTE 060810.pdfRegardsJohn Barnett Quote Link to comment Share on other sites More sharing options...
photoflora Posted August 23, 2010 Report Share Posted August 23, 2010 John, further to my earlier message, now I've had a good look, I would like to quote you fairly extensively, and 'borrow' some of your illustrations, to make up a presentation for my group of A-V enthusiasts. It wil be a PowerPoint presentation, and it will only be used for teaching a couple of relatively small classes here in Worcester. I'll credit you of course!Look forward to your reply,Best wishes,Andrew Gagg(Leader, Worcester U3A A-V and Photo groups)Hi,This is an area that I have never been too confident with so I thought that now was the time that I should make the effort to understand it more clearly. I have put together a document that was intended to be two pages but has developed into twenty. I hope it may be of help to others and I certainly hope that there are not too many errors. I would very much appreciate anybody who spots an error to bring it to my attention and I will endeavour to put it right.One particular area of doubt is crossover. I have carried out some basic research with Audacity which suggests to me that I am correct in what I say, but I still have a little niggle of doubt!I am indebted to Peter Appleton who manfully agreed to proof read for me. He did much more than that, pointing out at least a couple of howlers that I have been able to address. I should also give credit to Lin's video tutorial which I would strongly recommend all to watch.This is the linkhttp://www.mediafire.com/file/uvnx8e46dx7lsu9/Audio in PTE 060810.pdfRegardsJohn Barnett Quote Link to comment Share on other sites More sharing options...
JEB Posted August 23, 2010 Author Report Share Posted August 23, 2010 John, further to my earlier message, now I've had a good look, I would like to quote you fairly extensively, and 'borrow' some of your illustrations, to make up a presentation for my group of A-V enthusiasts. It wil be a PowerPoint presentation, and it will only be used for teaching a couple of relatively small classes here in Worcester. I'll credit you of course!Look forward to your reply,Best wishes,Andrew Gagg(Leader, Worcester U3A A-V and Photo groups)Andrew,I'm flattered!Certainly, use what you wish.This started out as an exercise with exactly the same objective as you have. I will be expected to explain this to members of my group shortly and I recognized that I was not very confident so ended up with this document. Credit should also be given to Peter Appleton who proof read and raised a number of aspects which I subsequently included.Hope its useful.John Quote Link to comment Share on other sites More sharing options...
davegee Posted August 23, 2010 Report Share Posted August 23, 2010 Sacrilege!!How dare you!!Using Powerpoint to demonstrate the finer points of PTE is decidedly non-PC.Take the plunge and use PTE - your audience would appreciate it.There is NOTHING that you can do in Powerpoint that you can't do (better) in PTE.DG Quote Link to comment Share on other sites More sharing options...
photoflora Posted August 24, 2010 Report Share Posted August 24, 2010 Horses For Courses Dave! I get a lot of mileage from both these nags - PowerPoint is a great lecturer's medium (I do a fair bit), and PTE is the best thing since sliced bread - for making Audio-Visuals... AndrewPS: I don't use a 'PC' for my lecturing, I use a lap-top... Heh, heh!A.Sacrilege!!How dare you!!Using Powerpoint to demonstrate the finer points of PTE is decidedly non-PC.Take the plunge and use PTE - your audience would appreciate it.There is NOTHING that you can do in Powerpoint that you can't do (better) in PTE.DG Quote Link to comment Share on other sites More sharing options...
photoflora Posted August 24, 2010 Report Share Posted August 24, 2010 Credits to you both then, John, and thanks again - it was a most useful task to take on!AndrewAndrew,I'm flattered!Certainly, use what you wish.This started out as an exercise with exactly the same objective as you have. I will be expected to explain this to members of my group shortly and I recognized that I was not very confident so ended up with this document. Credit should also be given to Peter Appleton who proof read and raised a number of aspects which I subsequently included.Hope its useful.John Quote Link to comment Share on other sites More sharing options...
davegee Posted August 24, 2010 Report Share Posted August 24, 2010 Andrew,I get the joke - but there are "PC" laptops and MAC Laptops (and that can also be taken both ways!!).Seriously, I have found that PTE can be used much more creatively for presentations than PP.DG Quote Link to comment Share on other sites More sharing options...
photoflora Posted August 24, 2010 Report Share Posted August 24, 2010 This might be going off-topic. I suppose it's what I've always been comfortable with. I see PP as having been written as a lecturer's medium, which stops and starts at will, and PTE (and others we won't name) as a vehicle for 'all-singing, all-dancing' presentations in real time. I know that PTE can be set up to stop and start as one would for a talk, and also that I can achieve PTE-like effects with PowerPoint (with a struggle), but they seem to approach the problem from opposite ends, if you take my meaning - one's naturally 'real-time' and the other controlled by the speaker's pace.That's my thoughts, anyway.Best...AndrewAndrew,I get the joke - but there are "PC" laptops and MAC Laptops (and that can also be taken both ways!!).Seriously, I have found that PTE can be used much more creatively for presentations than PP.DG Quote Link to comment Share on other sites More sharing options...
BobM Posted August 24, 2010 Report Share Posted August 24, 2010 Hi John,Thank you for a very informative document.One typo I think, page 20, second paragraph, end of 1st sentence 'Add Sound audio' rather than 'Add Slide audio'.Bob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.