Ed Cordes Posted January 7, 2013 Report Share Posted January 7, 2013 I have been using PTE for several years. Since upgrading to 7.5 I have noticed an occasional color shift in my images in a slide show. I am using Win 7 64 bit. I have a calibrated monitor with a graphics quality isp panel.My work flow is to process Canon RAW files in Light Room and Photoshop. I then flatten, convert them to sRGB, and 8 bit and then re size them for the proper show output in jpeg format - usually 1920 X 1080. While this issue is not evident on every image I do notice a shift to more red and higher overall saturation of many images in a show. When I go back tot he original image the colors are correct. If I right click the image in PTE and open it in Windows Picture viewer of something like it the colors are correct. The only place the colors are wrong is in the slide show.Any suggestions would be appreciated.Ed Quote Link to comment Share on other sites More sharing options...
fh1805 Posted January 7, 2013 Report Share Posted January 7, 2013 Ed,These two topics may have relevant information in them:regards,Peter Quote Link to comment Share on other sites More sharing options...
Ed Cordes Posted January 7, 2013 Author Report Share Posted January 7, 2013 Ed,These two topics may have relevant information in them:regards,Peter Thanks Peter. I'll check them out now. Quote Link to comment Share on other sites More sharing options...
Ed Cordes Posted January 7, 2013 Author Report Share Posted January 7, 2013 OK I read the links generously provided by Peter. Unfortunately I don't think they directly apply. All my images for this show were batch processed to sRGB converted to jpeg and resized by Light Room 4.3 from Tif files - in the same batch and at the same time. The issue I have is extra red and overall saturation.I will try to convert the most obviously over done file using CS6 Save For Web to see if there is a difference. One of the puzzling aspects is when I right click on the image in PTE and open it in Windows Image Preview, or any other image viewing program, the image presentation is correct. This leads me to beleive the image itself is OK but the PTE presentation is in error.Now, of course what I do not know is what the image will look like when projected or on a TV. I have not yet built the video yet as the show is still a work in progress.Thanks for all suggestions. Quote Link to comment Share on other sites More sharing options...
davegee Posted January 7, 2013 Report Share Posted January 7, 2013 Just put one image up which displays the problem and let us try it out in PTE and PS etc.?DG Quote Link to comment Share on other sites More sharing options...
xahu34 Posted January 7, 2013 Report Share Posted January 7, 2013 ... All my images for this show were batch processed to sRGB converted to jpeg ...PTE isn't a color manged application, it does not care for color spaces. If your monitor isn't set to sRGB, then sRGB should not be the color space of your choice. Convert your images to the color space that has been assigned to your monitor by your calibration software. Some people in this forum always recommend to choose sRGB. In many cases, this will be a good choice (e.g. with many projectors), but typically not for calibrated monitors. Regards,Xaver Quote Link to comment Share on other sites More sharing options...
Ed Cordes Posted January 8, 2013 Author Report Share Posted January 8, 2013 PTE isn't a color manged application, it does not care for color spaces. If your monitor isn't set to sRGB, then sRGB should not be the color space of your choice. Convert your images to the color space that has been assigned to your monitor by your calibration software. Some people in this forum always recommend to choose sRGB. In many cases, this will be a good choice (e.g. with many projectors), but typically not for calibrated monitors. Regards,XaverThanks for your input Xaver. While you present an interesting thought my monitor does not have a specific color space assignment. I use an X-Rite i-One calibration device and re calibrate about every month, so the profile will vary. It is also puzzling that I did not notice this issue in previous versions of PTE. I will see how the images project when I present the show.Thanks again,Ed Quote Link to comment Share on other sites More sharing options...
xahu34 Posted January 8, 2013 Report Share Posted January 8, 2013 Just a test: Open one of your TIF images with Photoshop, and make a color space conversion to the present color space of your monitor. Then save this image as a JPG. Run the JPG in PTE. Does your problem still exist in this case?Regards,Xaver Quote Link to comment Share on other sites More sharing options...
Ed Cordes Posted January 8, 2013 Author Report Share Posted January 8, 2013 Just a test: Open one of your TIF images with Photoshop, and make a color space conversion to the present color space of your monitor. Then save this image as a JPG. Run the JPG in PTE. Does your problem still exist in this case?Regards,XaverThanks again. I will try this when I get home from work tonight and report back.Ed Quote Link to comment Share on other sites More sharing options...
Ed Cordes Posted January 10, 2013 Author Report Share Posted January 10, 2013 OK Problem is solved. Xaver was correct. Saving the image with the monitor profile created correct colors. While this worked, I am really going to advocate that PTE be made a color managed software package. We spend a lot of time ensuring our images are in the correct color space and our monitors are calibrated. A color managed work flow is the standard we try to follow. I would suggest that sRGB be the "normal" color space to make our work flow consistent.So, Thanks Xaver for having the patience to work with me. If PTE could be color managed it would be great.Regards,Ed Quote Link to comment Share on other sites More sharing options...
xahu34 Posted January 11, 2013 Report Share Posted January 11, 2013 Like a mantra, some people use to say sRGB, whenever color problems show up. The only AV program that I know to offer dynamic color management is Wings Platinum. On the other hand, the manufacturer of Wings does not recommend to use this feature because of dramatic performance degradation. So what could future versions of PTE offer? Perhaps a function for copying projects (project files plus media) with user defined destination color profiles. On the other hand, we can easily produce a normal copy (via Zip Backup), and use a free tool like XnView to run a single batch processing in order to mange the desired color space conversion Regards,Xaver Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.