gdadmd Posted February 20, 2013 Report Share Posted February 20, 2013 Igor,Following are my comments concerning the PTE functionality..Subject : Personalized effectsVersion PTE : 7.5.4I performed two personalized effects with object masks on two couples of pictures A-B and C-D. On views A and C, there is a single object picture, on views B and D, there is one object picture and an object mask. When I read these two effects on the assembly board, I notice an undesired move of the masks ( objects of views B and D). This move is also visible on the viewing vignette of this effect on the “view Customize Slide".For the first effect (A-B)it is a sideways move (left/right), for the second effect (C-D), it is an angular move because of the 45° angular position of the mask.In preview and continuous reading, everything is perfect, there is no move of the concerned masks.- Have you already experienced such a discrepancy?- Why is there such a behavior between these two modes?- Are the masks to be banned on the second picture when a personalized effect, including one or two masks, is used?- Are the masks to be banned when performing personalized effects?This operating anomaly has been experienced since the version 7.5 Beta 1. Before informing you of this problem, I have preferred to wait for a forthcoming version of this software.By following the above mentioned process course, you will find the complete record of this test with two video films.Folder hereI thank you very much for the attention you will pay to these remarks.Very sincerely yours,Gérard. --------------------------------------------------------------------Bonjour Igor,Voici mes remarques sur une fonctionnalité de PTE.Sujet : Effets Personnalisés.Version PTE 7.5.4J'ai réalisé deux effets personnalisés avec objet(s) masque(s) sur deux couples d'images A-B et C-D. Sur les vues A & C un seul objet Image, sur les vues B & D un objet Image et un objet Masque. Lorsque je lis ces deux effets sur la table de montage je remarque un mouvement non programmé des masques(objets des vues B et D). Ce mouvement est également visible sur la vignette visualisation de l'effet de la fenêtre "Configuration de la vue".Pour le 1° effet(A-B)ce mouvement est latéral(droite-gauche), pour le 2° effet(C-D) ce mouvement est angulaire du fait de la position du masque à 45°En prévisualisation et en lecture continue tout est parfait, ce mouvement des masques concernés est inexistant.- Avez-vous déjà constaté cette anomalie ?- Pourquoi cette différence de comportement entre les deux modes ?- Les masques sont-ils à proscrire sur la 2ième image lorsqu'on utilise un effet personnalisé comportant lui-même un ou des objets masques ?- Les masques sont-ils à proscrire lors de la réalisation d'effets personnalisés ?Cette anomalie de fonctionnement existe depuis la version 7.5 Beta 1. Avant de vous faire part de ce problème, j'ai préféré attendre les différentes évolutions du logiciel suivant les dernières versions..................... Quote Link to comment Share on other sites More sharing options...
davegee Posted February 20, 2013 Report Share Posted February 20, 2013 Gerard,If your working aspect ratio is something other than 4:3 i.e. 16:9 you should change the aspect ratio when entering the Custom Transition Editor and immediately SAVE it.When you re-open the Custom Transition for further editing it should work OK.You can use CANVAS in place of MASKS.Please see PM.DG Quote Link to comment Share on other sites More sharing options...
gdadmd Posted February 20, 2013 Author Report Share Posted February 20, 2013 The solution you propose to me has nothing to with the problem that I encounter.Please view the examples which are the subject of my post.Thank you Quote Link to comment Share on other sites More sharing options...
davegee Posted February 20, 2013 Report Share Posted February 20, 2013 Apologies,I misunderstood your post.DG Quote Link to comment Share on other sites More sharing options...
Artem Posted February 21, 2013 Report Share Posted February 21, 2013 Gerard,I downloaded and examined your project and both custom transitions.First transition: A-BBefore you saved this transition, you must have seen the following warning:"Incorrect position of "Slide1" or "Slide2" objects. "Slide1" should fit the screen in the beginning of transition effect, and "Slide2" in the end. Continue?"This is the reason for discrepancy in your first transition.Second transition: C-DYou discovered a bug in PicturesToExe 7.5.0-7.5.4. If custom transition has masks, and the slide after transition also has masks, some coordinates are incorrect.Thank you for finding this problem! It will be fixed in the next patch version 7.5.5.Artem Quote Link to comment Share on other sites More sharing options...
gdadmd Posted February 21, 2013 Author Report Share Posted February 21, 2013 Artem,I corrected the default transition A-B, the problem is still present.Thanks Quote Link to comment Share on other sites More sharing options...
Artem Posted February 21, 2013 Report Share Posted February 21, 2013 Gerard,Yes, you're right. It must be the same bug, then. You have masks in A-B transition, as well as on slide that is after it.Artem Quote Link to comment Share on other sites More sharing options...
Igor Posted February 27, 2013 Report Share Posted February 27, 2013 Gerard,Please try this test version:https://dl.dropbox.com/u/27544810/pte/picturestoexe-setup-2012-02-27.exeDoes it solve that problem? Quote Link to comment Share on other sites More sharing options...
gdadmd Posted February 27, 2013 Author Report Share Posted February 27, 2013 Igor,After several tests, I can confirm that version 7.5.5 solves the problem perfectly. Bravo and thank you and your team.Sincerely,Gerard. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.