Igor Posted March 4, 2004 Report Posted March 4, 2004 PicturesToExe v4.20 beta #9 is releasedhttp://www.wnsoft.com/apr/apr_beta.zip (1,4 Mb)It's a Release Candidate.What's new in beta #9: • Updated Italian and Swedish language files. • Fixed old small visual bug in "Customize synchronization" window. • Minor corrections. Quote
The oldie Posted March 4, 2004 Report Posted March 4, 2004 Igor,Many thanks for all the splendid amendments and improvements.You are on beta 9, will you be adding anything more before a new release?Is it worth waiting a little time more?Alan in UK Quote
HaroldB Posted March 4, 2004 Report Posted March 4, 2004 Igor,A question and a suggestion.Do we still need to edit APR.INI to add opt_fastFade=1 with beta 9?I'd consider adding a fix for using the arrow keys during the playing of a show to 4.20 before it is officially released. As it is now, the arrow keys work, but since using them doesn't also pause the show, it's very jumpy and pretty unpredictable when you hit the left arrow key a number of times.You'll know best how to fix it.Harold Quote
Igor Posted March 4, 2004 Author Report Posted March 4, 2004 Do we still need to edit APR.INI to add opt_fastFade=1 with beta 9?Yes, I'll turn on it by default in the first beta of the next version.Harold,Did you mean synchronized mode with choosed "Permit the control of show" option? I tried with my slide-show and pressed Left and Right buttons many times and within several seconds all requested slides were shown and no problem with correct synchronization of slides and music. Let me know please, if I didn't understand your question rightly. Quote
HaroldB Posted March 5, 2004 Report Posted March 5, 2004 Did you mean synchronized mode with choosed "Permit the control of show" option? I tried with my slide-show and pressed Left and Right buttons many times and within several seconds all requested slides were shown and no problem with correct synchronization of slides and music. Let me know please, if I didn't understand your question rightly.Yes, I meant synchronized mode with the "Permit the control of show" option.There was a thread on this a while ago. Now, when you hit the left button repeatedly, for example, it DOES go backward successfully. But since it apparently also tries to go forward after going backward, it seems to go backward for a slide, then start going forward, then go backward again, etc. It ends up working but looking terrible. In addition, if I want to go back exactly ten slides, for example, it becomes confusing to know exactly where PTE is up to in repositioning.The previous thread suggested that when you hit the left or right key, the PTE show should also go into pause mode, which would allow me to go back or forth to EXACTLY wherever I want to go to, and then I should be able to press the space bar (or the mouse button, if appropriately specified in Project Options) to resume the show.Harold Quote
Igor Posted March 5, 2004 Author Report Posted March 5, 2004 Thanks, I've understood now.I think it can be realized in the next version when we will work on it. Quote
Ken Cox Posted March 5, 2004 Report Posted March 5, 2004 Yes, I'll turn on it by default in the first beta of the next version. opt_fastFade=1 Igor,opt_FastFade=1opt_SmoothFade=1In 4.2 final these lines are not in the inithey are not necessaryis that correct??ref threadhttp://www.picturestoexe.com/forums//index...t=ST&f=2&t=1682ken Quote
Guest Techman1 Posted March 6, 2004 Report Posted March 6, 2004 Ken,At the bottom of Igor's new release message for 4.20, he states the following:"p.s. please don't forget to check up for presence of opt_FastFade=1 string (in the apr.ini file after pte_SoundInitDir= string), because this option will be turned on by default only in the next version automatically. This option will make Fade effect in two-three times more smooth especially on old PCs. Before editing of apr.ini file please close all copies of PTE."He is planning on putting this in as a default in the next version (4.30 I believe).Regards,Fred Quote
Ed Overstreet Posted March 6, 2004 Report Posted March 6, 2004 Yesterday I installed the new (non-beta) version 4.20 and checked apr.ini to see if I needed to add those two lines (FastFade and SmoothFade) -- they were in the apr.ini file that had installed (either that, or the installation didn't over-write the earlier apr.ini which I'd edited). So unless I'm mistaken, Igor has already implemented this change as a default in 4.20. Quote
Marianne Posted March 6, 2004 Report Posted March 6, 2004 I just downloaded v4.20 and did a little test. Seems that when I add opt_fastFade=1 ánd opt_SmoothFade=1 , the transitions get worse. They are flickering. I have an AMD 1500xp system and Windows XP pro. But when I leave out the option SmoothFade, the transitions are like they are meant to be. Very, very smooth.Seems to me that adding the option SmoothFade to the ini file at least in my case is overkill.I am very content with the option fastFade though. I compared this with an earlier version and a show made in the earlier version. Transitions are significantly better.Didn't think that was possible, because I thought the toplevel of quality was reached Thank you Igor, I'll keep up advertising your software to all my friends!Marianne Quote
Ken Cox Posted March 6, 2004 Report Posted March 6, 2004 they were in the apr.ini file that had installed (either that, or the installation didn't over-write the earlier apr.ini EdI have been informed if you overinstall the existing ini doesn't change --so your modified one would stay by design -- I install each version to a separate directory for back checking features.Marianneseehttp://www.picturestoexe.com/forums//index...t=ST&f=2&t=1682thread for specific settings recommended by Igorken Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.