lisamike Posted July 7, 2004 Report Share Posted July 7, 2004 This is my first serious project. I prepared 50 slides into a slide show and added a music track of 4mins and 2 seconds without difficulty. After saving it and playing it back many times I decided to add another slide at the end, which was a copy of my opening slide. Although I adjusted the on screen times of the last 10/12 slides to give more than adequate time for this extra slide I can not get P2E to resynch to the end of slide 51. The slide No51 shows in the main selected slide list (on the right of the screen) and when I play the project the slide plays in its correct position at the end but the music finishes with slide 50 and 51 stays on screen until I escape out of it. I have attempted every possible combination I can think of to removing slides and repositioning them. I have unsynched the project and ticked/unticked the control radio button but with no success. If's as if P2E holds on to the first settings and will not reset to new conditions/settings. I have tried to resolve this problem in V4,V4.2 and V4.3 beta. I accept it must be something I am doing wrongly but I am blowed if I can resolve it, Can anyone Help! LisaMike Quote Link to comment Share on other sites More sharing options...
Alan Lyons Posted July 7, 2004 Report Share Posted July 7, 2004 Hi Colin, Welcome to the forum you have come to the right place for any problems you may have using P2E. Most have already been answered but it's no harm to start a thread and see where it leads. Your problem is that you need to "add new transitition" to the timeline beyond the last slide you had in position before you added the extra(s). You need to do this for each extre slide. Alao check the project options to see if you have requested "Leave last slide on screen" To have your show finish you need to sellect "Exit after last slide"This should put you on the right track,Best of luck,Alan Quote Link to comment Share on other sites More sharing options...
ronwil Posted July 7, 2004 Report Share Posted July 7, 2004 First of all in Project Options>Mai- Show Settings have you selected "Close show after last slide". Next are you using "Customise Synchronisation", if so make some minor adjustments to the positioning on the Timeline of the last few slides bringing in the music at that point so as to correct the fades to your satisfaction and making sure that you have inserted your last slide on the time line by adding a transition point.Good LuckRon [uK] Quote Link to comment Share on other sites More sharing options...
ronwil Posted July 7, 2004 Report Share Posted July 7, 2004 Great minds think alike. Alan has added a similar comment whilst I was composing mine.Ron [uK] Quote Link to comment Share on other sites More sharing options...
Alan Lyons Posted July 8, 2004 Report Share Posted July 8, 2004 Glad to be of service, your Ronship Quote Link to comment Share on other sites More sharing options...
lisamike Posted July 8, 2004 Author Report Share Posted July 8, 2004 Hi Colin, Welcome to the forum you have come to the right place for any problems you may have using P2E. Most have already been answered but it's no harm to start a thread and see where it leads. Your problem is that you need to "add new transitition" to the timeline beyond the last slide you had in position before you added the extra(s). You need to do this for each extre slide. Alao check the project options to see if you have requested "Leave last slide on screen" To have your show finish you need to sellect "Exit after last slide"This should put you on the right track,Best of luck,Alan Hi Alan, Your advice resolved my problem after a little bit of fiddling. Thank you so much. How do I now upload my A/V for constructive criticism? Quote Link to comment Share on other sites More sharing options...
Alan Lyons Posted July 8, 2004 Report Share Posted July 8, 2004 Hi again, go to http://beechbrook.com/upload/ you'll need your .exe, an icon and a small image for the site, this is usually your Title slide. Full details will be on the upload page. Once you have uploaded, your show will apear on the site once Bill has had a look. Then you can hide in the wardrobe .Alan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.