Vernon Foster Posted July 23, 2004 Report Share Posted July 23, 2004 2 days into my first "creation"... to be used for photography clients and advertising. My question is how do I remove the blue boarder on the startup window image? It looks/appears just like the blue frame from photoshop with red cancel button on top right of frame. (probably something rather easy, but being the complicated person that I am... lol). Thanks in advance! vf Quote Link to comment Share on other sites More sharing options...
alrobin Posted July 23, 2004 Report Share Posted July 23, 2004 Hi, Vernon,Welcome to the Forum!You might be using "Windowed mode" - go to "Project Options / Screen" and check "Fullscreen mode".Hope this helps. If not, please post again. Quote Link to comment Share on other sites More sharing options...
Vernon Foster Posted July 23, 2004 Author Report Share Posted July 23, 2004 Thanks for the response... but, I was in full screen mode (not windowed). As a test, I rewrote the project and use "windowed mode" which affected all of the slides (the startup window was as before..showing the blue bordered frame).I rewrote the project a 3rd time... made sure "full screen mode" was checked and then created the startup window followed by a few slides. Same problem... blue frame on the startup window, but the slides were OK. Can't find any tools to edit out the frame. Any ideas? Thanks in advance. vf Quote Link to comment Share on other sites More sharing options...
alrobin Posted July 23, 2004 Report Share Posted July 23, 2004 I may have given you a bum steer. By startup, I thought you were referring to first slide of the show, itself.The "startup window" option used as an "introduction" to the show does have a blue bar at the top, and I don't think you can eliminate it. Quote Link to comment Share on other sites More sharing options...
Vernon Foster Posted July 23, 2004 Author Report Share Posted July 23, 2004 Thanks Al for your help... would be nice if the folks working on coding would provide some editing features for the "startup window" elements. vf Quote Link to comment Share on other sites More sharing options...
Ken Cox Posted July 24, 2004 Report Share Posted July 24, 2004 Main screenun check the box beside the customize start up window and the startup window will not be shownthen if you need some intro info you use the object editorken Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.