dennisb Posted January 18, 2006 Report Posted January 18, 2006 I have a slide show where each slide has its own descriptive comment. Everything is ok on the computer, but when I burn the show to DVD, the comments are not visible, or only partly visible at the bottom of the screen. Changing the image size (screen%) leaves more room for the comment line, but I would need to make it appear higher up to be visible. Does anyone know of a way I can control the placement of the comment line other than by the "top", Bottom" etc options. Quote
Ken Cox Posted January 18, 2006 Report Posted January 18, 2006 Dennniswelcome to the forumseehttp://www.picturestoexe.com/forums/index....st=entry21797ken Quote
dennisb Posted January 19, 2006 Author Report Posted January 19, 2006 Dennniswelcome to the forumseehttp://www.picturestoexe.com/forums/index....st=entry21797kenMany thanks Ken. I did give the method shown on the post you linked to and did not see much difference, so thought I was on the wrong track. Another poster suggested they needed an offset of about 40 to make it work ok. I was obviously being too cautious Thanks again Quote
Ken Cox Posted January 19, 2006 Report Posted January 19, 2006 Dennisthink the last time i used it i started at 100 and worked from there"go boldly forth" ken Quote
Ken Cox Posted January 20, 2006 Report Posted January 20, 2006 Dennisjust checked a show that i adjusted the comments placement49 pixelsthis gave me a placement of 1" up from bottom of my 19" monitor as well as my 29" tvken Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.