4153sh Posted January 22, 2006 Report Share Posted January 22, 2006 I have been using PictureToExe for about a year now, but only 3 times, with not much problems.Today I am trying to make a slide show and having problem getting sound when I preview the project after adding the sound files, in wma. I discovered the sound duration is 00.00 when I click the "show music duration." Is that the reason I don't get sound? If so how do I correct it.Or is there other things I did or I didn't do to cause this problem?Any help is much appreciated by this beginner. Thanks. Quote Link to comment Share on other sites More sharing options...
Ken Cox Posted January 22, 2006 Report Share Posted January 22, 2006 it may be the wma filetry a mp3oryou might not have the box checked to play musicken Quote Link to comment Share on other sites More sharing options...
4153sh Posted January 22, 2006 Author Report Share Posted January 22, 2006 it may be the wma filetry a mp3oryou might not have the box checked to play musickenThanks for the quick reply. I have replaced the wma music files to 3 mps files, and the "play background music" was checked in the original project. There is still no sound!Shik Lee Quote Link to comment Share on other sites More sharing options...
Ken Cox Posted January 22, 2006 Report Share Posted January 22, 2006 Shikrefer back to the pict i put updoes your mp3 file show at the top of the window like mine ? - mine shows 2 entries Quote Link to comment Share on other sites More sharing options...
Conflow Posted January 23, 2006 Report Share Posted January 23, 2006 Shik Lee,First check this:- Double Click the 'Loudspeaker Icon' down to the lower RH.side of your Screen. Check that the 'Output' and 'Wave' Sliders are not muted, and they should be at least ½ way level ~ its likely to be as simple as that !Brian.Conflow. Quote Link to comment Share on other sites More sharing options...
4153sh Posted January 23, 2006 Author Report Share Posted January 23, 2006 Shikrefer back to the pict i put updoes your mp3 file show at the top of the window like mine ? - mine shows 2 entriesYes, it shows the 2 mp3 file titles which I selected in the window. Shik Lee Quote Link to comment Share on other sites More sharing options...
4153sh Posted January 23, 2006 Author Report Share Posted January 23, 2006 Shik Lee,First check this:- Double Click the 'Loudspeaker Icon' down to the lower RH.side of your Screen. Check that the 'Output' and 'Wave' Sliders are not muted, and they should be at least ½ way level ~ its likely to be as simple as that !Brian.Conflow.Have just checked the Play Control. The Output is not muted. Also tried adjusting the slider from 1/2 way up to the top, but still getting no sound. Thanks.Shik Lee Quote Link to comment Share on other sites More sharing options...
Conflow Posted January 23, 2006 Report Share Posted January 23, 2006 Shik Lee,Thats a very unusual fault as you appear to have done everything that Ken suggested ~ may I ask, does your PC play an ordinary CD-Music Disc ? ~ or is it likely that your 'Sound Output Plug' has become disconnected ? ~ if you are having problems here, simply plug a pair of Headphones into the 'Sound Socket' on the front of the CD-Drive Unit and see if you can get sound there? ~ if you do it means there is sound on the CD then the 'fault' is most likely due to a set-up problem (missing driver) or your Sound Card may have gone dud, or indeed the Pte program may have been corrupted. The reason I make these simple suggestions is because we all take 'things for granted' ~ and because 'No Sound Problems' are usually associated with simple things which are often overlooked, so before you start doing something drastic make sure you haven't overlooked something.Brian.Conflow. Quote Link to comment Share on other sites More sharing options...
4153sh Posted January 23, 2006 Author Report Share Posted January 23, 2006 Shik Lee,Thats a very unusual fault as you appear to have done everything that Ken suggested ~ may I ask, does your PC play an ordinary CD-Music Disc ? ~ or is it likely that your 'Sound Output Plug' has become disconnected ? ~ if you are having problems here, simply plug a pair of Headphones into the 'Sound Socket' on the front of the CD-Drive Unit and see if you can get sound there? ~ if you do it means there is sound on the CD then the 'fault' is most likely due to a set-up problem (missing driver) or your Sound Card may have gone dud, or indeed the Pte program may have been corrupted. The reason I make these simple suggestions is because we all take 'things for granted' ~ and because 'No Sound Problems' are usually associated with simple things which are often overlooked, so before you start doing something drastic make sure you haven't overlooked something.Brian.Conflow.I agree its very unusual.Although I prefer using PictureTo Exe, for this project which I need for tomorrow I have it done using another software. The sound turn out ok with exactly the same number of slides and music, but I will use it only as my Plan B. It shows that the fault is not my computer. It is possible that the Pte may have been corrupted. Between now and tomorrow I continue to work on the same project using Pte and would like to tell you and Ken what I have done this morning.As I indicated in my original post, I found out that the music duration is 00.00. I clicked the Timeline tab to open the "Customize Synchronization" window which indicates 'Please go to the Music tab in the Project Options and add sound file(s). At the bottom of the same window, it shows the number of slides of 113; transitions, 113, music duration,00.00; and position, 00.00.00. Having checked to confirm that the sound files have been added, my guess is that the Music duration of 00.00 is probably the problem.Within the Customize Synchronization window, I clicked "Timed Points" which shows 8 options to add and arrange time points and set time of points. When I clicked any one of them, nothing happened. I also tried the 'Import points from another Project' option....the end result: a window showing "no transitions in this project." The project I tried to import from is a succesful project.From what I have done so far, I suspect that the program may have been corrupted. If so, how do I reinstall the software? I purchased it online with no disc.Thank you and Ken for the help so far. Any more help can be offered is much appreciated.Shik Lee Quote Link to comment Share on other sites More sharing options...
Ken Cox Posted January 23, 2006 Report Share Posted January 23, 2006 Shikthe registation key is buried in your registry and will stayso just reinstall your programbut you should save your communication to register and your reg key to floppy or cdalsotry the show un synchronizedam not up to custom sync so can not help you therebut try unsync before you reinstallken Quote Link to comment Share on other sites More sharing options...
Ronniebootwest Posted January 23, 2006 Report Share Posted January 23, 2006 I had this very same problem just recently!Even though your preview button does not produce any sound - what happens if you continue to create the slideshow (.exe) file, does the music play then? If so, uninstall the PTE program and download the latest version and install that. I did that and my sound worked OK. Quote Link to comment Share on other sites More sharing options...
alrobin Posted January 23, 2006 Report Share Posted January 23, 2006 I too have had this same problem on my new laptop. When I transfer the pte file over to my desktop, then the sound is fine during the preview. If I "create" the show, then the sound is also fine. I have Win XP running on both laptop and desktop (but the Win Media version of XP on the laptop). Very strange, as this anomaly has never shown up before on either my old laptop or my desktop pc. I'm using pte version 4.45. Quote Link to comment Share on other sites More sharing options...
4153sh Posted January 24, 2006 Author Report Share Posted January 24, 2006 I too have had this same problem on my new laptop. When I transfer the pte file over to my desktop, then the sound is fine during the preview. If I "create" the show, then the sound is also fine. I have Win XP running on both laptop and desktop (but the Win Media version of XP on the laptop). Very strange, as this anomaly has never shown up before on either my old laptop or my desktop pc. I'm using pte version 4.45.Just want to thank everyone for the help received. I think I have sufficient info to solve my problem.I will be busy for the next two days and will not be working on this project. When I eventually have the program running the way it should, I will keep you updated.Shik Lee Quote Link to comment Share on other sites More sharing options...
giljones Posted January 29, 2006 Report Share Posted January 29, 2006 I have been using PictureToExe for about a year now, but only 3 times, with not much problems.Today I am trying to make a slide show and having problem getting sound when I preview the project after adding the sound files, in wma. I discovered the sound duration is 00.00 when I click the "show music duration." Is that the reason I don't get sound? If so how do I correct it.Or is there other things I did or I didn't do to cause this problem?Any help is much appreciated by this beginner. Thanks.[/quoteI have just encountered the same problem I have three sequences which are working ok I have just created a new one and added sound and nothing happens. I have tried all the suggestions here and nothing works. I have yet to download another copy and try that. Be interested to know if you have solved the problem. Gilbert Quote Link to comment Share on other sites More sharing options...
JRR Posted January 29, 2006 Report Share Posted January 29, 2006 GilbertTry an MP3 file. If my memory serves me correctly .wma is not a valid file type for PTE (and some other softwares as it is a windows proprietry file).But I have been wrong before... Quote Link to comment Share on other sites More sharing options...
giljones Posted January 29, 2006 Report Share Posted January 29, 2006 GilbertTry an MP3 file. If my memory serves me correctly .wma is not a valid file type for PTE (and some other softwares as it is a windows proprietry file).But I have been wrong before...I am using mP5 files created by Windows Media Player which have worked for my other shows. Have since completley removed the programme and re loaded it but the results are exactly the same. I forgot to mention that when I press the preview button I get a message telling me that the programme canot find the music file I have loaded. I have checked the validity of the music files and they all run ok. Help Gilbert Quote Link to comment Share on other sites More sharing options...
JRR Posted January 29, 2006 Report Share Posted January 29, 2006 Gilbert:If you say you have been successful with mp5's before OKDid you look at Ronniebootwest's and Alrobin's postings of Jan 23 @3:28 and 5:11est several postings above yours ? Quote Link to comment Share on other sites More sharing options...
alrobin Posted January 30, 2006 Report Share Posted January 30, 2006 Gilbert,It sounds like your music files are not compatible with PTE. Try converting them to mp3 files using Audacity or a similar editor and see if that helps. Or, get hold of some other mp3 files and install them temporarily as your music files to see if they are accepted by the program. Quote Link to comment Share on other sites More sharing options...
Igor Posted January 30, 2006 Report Share Posted January 30, 2006 Please read my topic with questions herehttp://www.picturestoexe.com/forums/index.php?showtopic=4042 Quote Link to comment Share on other sites More sharing options...
4153sh Posted January 30, 2006 Author Report Share Posted January 30, 2006 Please read my topic with questions herehttp://www.picturestoexe.com/forums/index.php?showtopic=4042I am happy to let everyone, who have been providing helpful suggestions, know that I have successfully created a MPG file with your help.As suggested, I removed the pte software and reintalled the Version 4.45. I then converted all wma files to mp3 before adding to the project. Although there was still no sound during preview, I went ahead to creat the slide show file (MPG) with Ulead VideoStudio. With the MPG file I was able to burn a DVD disc of the show.For now I am satisfied that I have succeeded in creating the slide show dvd disc, I have two questions:1). Why no sound during Preview?2). With Ulead VideoStudio, I could only produce a MPG file. The "avi" file produced by UleadVS has only sound but no video - that may be a problem with the Ulead software and nothing to do with PTE.Thanks again to everyone.Shik Lee Quote Link to comment Share on other sites More sharing options...
alrobin Posted January 30, 2006 Report Share Posted January 30, 2006 1). Why no sound during Preview?Shik,You might be interested in following the thread that Igor mentioned above, and maybe contributing to some of the tests. Quote Link to comment Share on other sites More sharing options...
4153sh Posted January 31, 2006 Author Report Share Posted January 31, 2006 Please read my topic with questions herehttp://www.picturestoexe.com/forums/index.php?showtopic=4042IgorBach.mp3 - music okm27...jpg - okm42...jpg - okpte-prev-synced.exe - cannpt open fileptemusic.pte - error message, picture not foundptemusic1.exe - video, no soundptemusic-synced.exe - computer freezed upAlso, I used your mp3 file for a test show, and got the same results as described in my other post, #20 - no sound during preview but a mpg file was successfully created.My computer:PC, Pentium 4, Windows XP Home, SP2, Sound card Realtek AC97Using version 4.45 now. Had more problems with 4.4 as described in my original post. ThanksShik Lee Quote Link to comment Share on other sites More sharing options...
Igor Posted January 31, 2006 Report Share Posted January 31, 2006 Shik,Please download this utility I've prepared:http://www.wnsoft.com/test/ShowLength.exe 1) Press "Open file and play" button. After it show duration of MP3 file, it should start playback. Close this utility.2) Start again this utility. Press "Play" button. Music should plays.Please let me know about two results.3) If you see "Lendth: 0 ms." message and music doesn't play, please try with my MP3 file. Download it here: http://www.wnsoft.com/test/1.mp3 (1.6 MB)(Right mouse click on the URL and choose "Save target as") Quote Link to comment Share on other sites More sharing options...
4153sh Posted January 31, 2006 Author Report Share Posted January 31, 2006 Shik,Please download this utility I've prepared:http://www.wnsoft.com/test/ShowLength.exe 1) Press "Open file and play" button. After it show duration of MP3 file, it should start playback. Close this utility.2) Start again this utility. Press "Play" button. Music should plays.Please let me know about two results.3) If you see "Lendth: 0 ms." message and music doesn't play, please try with my MP3 file. Download it here: http://www.wnsoft.com/test/1.mp3 (1.6 MB)(Right mouse click on the URL and choose "Save target as")Downloaded "showlength.exe." It didn't play, and got a window showing get length and a play button. Pressed "Play" button, a window opened showing Drive C - looking for a mp3 file. Didn't see any "Length:0 ms" message.Downloaded "1.mp3." Music played. Quote Link to comment Share on other sites More sharing options...
Igor Posted January 31, 2006 Report Share Posted January 31, 2006 So my utility shows correct length for my 1.mp3 file and always "0 ms." for your MP3 files?1) Please send me to int_support (replace to @) wnsoft.com one of your MP3 file.2) Download and try this slide-show I've created: http://www.wnsoft.com/apr/show/v445_Per_aspera_ad_astra.zipWill the music plays? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.