Jump to content
WnSoft Forums

Small Aplifier For AV Shows


Guest Yachtsman1

Recommended Posts

Guest Yachtsman1

I have been to a couple of presentations where an amplifier and non powered speakers are being used. I would like to circumvent using my earphone socket to my powered speakers if possble, either from the USB connections on my laptop or one of the other connections to an amplifier. Has anyone any hardware suggestions.

Yachtsman1

Link to comment
Share on other sites

Guest Yachtsman1
Link to comment
Share on other sites

Eric,

Desktop PC Loudspeakers are 'Self-Powered' via their own Main supply and use the 'Earphone-MiniJack' on the

rear of the PC - so the signal is there. Why not wire up a 'Stereo 3.5mm Mini-Jack Plug' and bring the signal to

one of your Self-Powered Amps and try it out.

You will have a screened cable with 2 wires. The screen is (ground) common and the 2 screened wires are

Left-Signal and Right-Signal (Stereo)...should work well excepting that some Laptops have a fair amount of

'noise' on that Jack Socket...but its worth a try for the few cents involved. Otherwise its a USB Sound Device.

Brian.Conflow.

Link to comment
Share on other sites

Guest Yachtsman1
Eric,

Desktop PC Loudspeakers are 'Self-Powered' via their own Main supply and use the 'Earphone-MiniJack' on the

rear of the PC - so the signal is there. Why not wire up a 'Stereo 3.5mm Mini-Jack Plug' and bring the signal to

one of your Self-Powered Amps and try it out.

You will have a screened cable with 2 wires. The screen is (ground) common and the 2 screened wires are

Left-Signal and Right-Signal (Stereo)...should work well excepting that some Laptops have a fair amount of

'noise' on that Jack Socket...but its worth a try for the few cents involved. Otherwise its a USB Sound Device.

Brian.Conflow.

Hi Brian

I have that system now, that's why I thought I would try a USB powered system, It's just finding someone who uses something similar. I don't have a card slot on my main laptop so the plug in sound card is out. The USB speakers suggested by someone have a few bad reviews regarding software. The LG system would maybe double as my home HIFI, but I'm not sure if the USB ability relates to signal in, will investigate further.

Yachtsman1

Link to comment
Share on other sites

The EDIROL - Optical to USB Interface that I use is two way i.e. both in and out.

Presumably they make a suitable non-optical interface.

The UA-1EX looks about right: http://www.ediroleurope.com/products.php?subcat=UFA

OR

http://www.rolandus.com/products/productli...px?ParentId=114

Their USB speakers are perhaps worth a look also - depends on the size of your audience.

http://www.ediroleurope.com/product_overvi...&country=GB

DaveG

Link to comment
Share on other sites

Guest Yachtsman1
The EDIROL - Optical to USB Interface that I use is two way i.e. both in and out.

Presumably they make a suitable non-optical interface.

The UA-1EX looks about right: http://www.ediroleurope.com/products.php?subcat=UFA

OR

http://www.rolandus.com/products/productli...px?ParentId=114

Their USB speakers are perhaps worth a look also - depends on the size of your audience.

http://www.ediroleurope.com/product_overvi...&country=GB

DaveG

Thanks Dave

Just downloaded the manual for the UA-1EX, it's 96 pages so it will take a little time to absorb :( The LG unit I mentioned earlier is not compatable at first glance.

Yachtsman1

Link to comment
Share on other sites

After some discussion earlier in the year on this same subject our camera club purchased one of these http://www.jaycarelectronics.co.uk/product...=&SUBCATID= We have used this in a large hall with passive speakers from a hi fi system with excellent results. The only word of caution is that if the speaker cable runs are long use a good quality thin wire.

Regards

Geoff

Link to comment
Share on other sites

Guest Yachtsman1
After some discussion earlier in the year on this same subject our camera club purchased one of these http://www.jaycarelectronics.co.uk/product...=&SUBCATID= We have used this in a large hall with passive speakers from a hi fi system with excellent results. The only word of caution is that if the speaker cable runs are long use a good quality thin wire.

Regards

Geoff

Hi Geoff

Looked at yours and the other suggestions, can I assume the sound from the laptop/pc is via the headphone jack? If it is it's not what I'm looking for, I want to use the USB connection to by-pass my sound card and jack. I've now put a bid on the Behringer UCA-202 on Ebay, will let you all know the results.

Yachtsman1

Link to comment
Share on other sites

Guest Yachtsman1
Hi Yachtsman1

yes we use the headphone out on laptop and line out on the PC. Out of curiosity why do you want to use the usb port?

Geoff

It's a long story, but basically you get a cleaner signal via USB socket than the audio / headphone out jack. If the sound card is not so good on your laptop/PC the sound signal will be improved using the USB socket.

Regards

Yachtsman1

Link to comment
Share on other sites

Guest Yachtsman1
The Behringer unit, whilst perhaps not as versatile as the Edirol, should be exactly what you need.

At £19.99 it's a bargain.

http://www.dv247.com/invt/32730/

DaveG

Hi Dave

I chose the Behringer over the Edirol as the Edirol frightened me off with its technicallity. I like the KIS principle.

Regards

Eric

PS the one on ebay got snatched, I bid £2 under the asking price but someone payed the asking price. I got one for £25 inc postage from an ebay dealer, which is a £5 less than Amazon.

Link to comment
Share on other sites

I have been to a couple of presentations where an amplifier and non powered speakers are being used. I would like to circumvent using my earphone socket to my powered speakers if possble, either from the USB connections on my laptop or one of the other connections to an amplifier. Has anyone any hardware suggestions.

Yachtsman1

When I discovered that my laptop only had a mono line input socket I discovered the "Sound Blaster Connect". This USB device allows two way stereo connection between PC's and any amplifying equipment. It even has optical connection capability. I and my music teacher have both used one very successfully connecting to a variety of amplifying equipment, from domestic HiFi to on site amplification systems. We both consider it exceptional. I also use it to record old LP's Cassettes and CD's from my Hi Fi, and from my Yamaha electronic keyboard.

see:-

Creative's site details.

Use of such a device would enable you to use existing HiFi kit, venue amplification equipment or any equipment you choose.

I can thoroughly recommend it.

Alan

Link to comment
Share on other sites

Guest Yachtsman1
When I discovered that my laptop only had a mono line input socket I discovered the "Sound Blaster Connect". This USB device allows two way stereo connection between PC's and any amplifying equipment. It even has optical connection capability. I and my music teacher have both used one very successfully connecting to a variety of amplifying equipment, from domestic HiFi to on site amplification systems. We both consider it exceptional. I also use it to record old LP's Cassettes and CD's from my Hi Fi, and from my Yamaha electronic keyboard.

see:-

Creative's site details.

Use of such a device would enable you to use existing HiFi kit, venue amplification equipment or any equipment you choose.

I can thoroughly recommend it.

Alan

Hi Alan

Thanks for that, I will report on the Behringer when it arrives.

Yachtsman1

Link to comment
Share on other sites

Eric,

My apology (brain elsewhere) ~ I had forgotten about the "Griffin IMic" ~

It has a Stereo Input-Socket 3.5mm AND a Stereo Output-Socket 3.5mm

and of course it's Microphone Input.

(It might be a 2nd alternative for other purposes).

Brian.Conflow.

Link to comment
Share on other sites

Guest Yachtsman1
Eric,

My apology (brain elsewhere) ~ I had forgotten about the "Griffin IMic" ~

It has a Stereo Input-Socket 3.5mm AND a Stereo Output-Socket 3.5mm

and of course it's Microphone Input.

(It might be a 2nd alternative for other purposes).

Brian.Conflow.

Hi Brian

I sent my IMIC back to the supplier, appeared faulty, lots of interferance.

Regards Eric

Yachtsman1.

Link to comment
Share on other sites

Many thanks to you guys of this thread informing me of the existence of a USB/Audio converter – Behringer UCA202.

I am out regularly doing AV shows for various groups using an external amplifier and speakers connected to my Dell laptop via its headphone socket. More recently I have been having problems with poor connections within the socket. On reading your correspondence I decided to order one via the internet.

I was surprised by the price range – up to £29 and similarly the p&p charges of up to £7. Eventually I found a company based in Southampton, UK (www.bluearan.co.uk) – their total cost £22.68 including 1st class postage. Ordered it on Monday evening and received it today (Wednesday) – excellent service including emails to let me know progress.

I found the manufacturer’s instructions useless for my application but, connecting the USB to my pc, the device was quickly installed. I then connected my amp’s phono lead to the unit’s outputs and the result is excellent sound. Do remember to turn the laptop’s volume to maximum (as I did when using the headphone socket) to get the correct sound levels! Hope you have the same results Yachtsman1 and thanks again to everyone.

Link to comment
Share on other sites

RMS and Users,

RMS, you wrote:..."Do remember to turn the laptop’s volume to maximum to get the correct sound levels"..

Woops !! ~ Before serious things happen this is not the correct way to get the proper levels. By turning up Laptop

Volume Controls to MAX and keeping them there can seriously overload the internal Audio-Amplifier and 'blow-it'

now you have a PC.Motherboard problem.

(This is quite a common fault which Laptops develop if unknowingly and accidentally misused)

The proper way to do this is by adjusting the (Software) 'Sound-Mixer' and keeping the Laptops' volume just audible.

The "Attachment" below explains how to do this.

I hope this cautionary note will help to avoid mishaps...

Brian.Conflow.

post-1416-1228338458_thumb.png

Link to comment
Share on other sites

Guest Yachtsman1

Hi All

As promised, my feedback for the Behringer UCA202. The delay is because I lent it to a friend for a week and only got it back Sunday. I plugged it into my laptops USB connection and connected the active speaker feed to the h/phone socket. It was immediately recognised but the sound wouldn't come from the speakers.

I fiddled around with the sound section in control panel and the speakers burst into life. The quality & tonal range was far superior to that from the laptops sound card, the bass in particular was deep and vibrant. The voice over from my latest show was much clearer, all in all a good £25's worth. :lol:

Yachtsman1.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...